Site icon TechMaze

Fix DVD drive not reading discs windows 10

dvd drive not reading discs windows 10

DVD drive not reading discs windows 10: There is a problem with the CD or DVD drives in Windows 10. Your DVD drive may not be able to read disks if you recently upgraded to Windows 10 and need to repair or replace your DVD drive. Replacing it isn’t necessary; instead, we’ll review a few methods for fixing this problem without replacing anything. Incompatible drivers, corrupted or old drivers, etc., may be blamed for this problem. The following troubleshooting procedures will help you fix the DVD drive not reading discs windows 10.

Fix DVD drive not reading discs windows 10

In the case that something goes wrong, make a restore point.

1: Rollback CD or DVD drive drivers

  1. Windows Key + R, devmgmt.msc, and Enter are the steps necessary to open the Dev Management Console.
  2. Right-click the CD/DVD drive and select Properties from the context menu.
  3. On the Drivers tab, select “Roll Back Driver.”
  4. To close Device Manager, you must wait until the driver has been restored.
  5. Restart your computer after you’ve finished working on it to keep your modifications.

2: Uninstall CD/DVD drive

  1. To open the Run dialog box, press the Windows key + R.
  2. Press the Enter key after typing devmgmt.msc.
  3. Click the Uninstall button to remove all CD and DVD drives from your computer.
  4. Take the machine out of the case and restart it. The drivers will be installed when the machine is restarted.

3: Run Hardware and Devices Troubleshooter – Fix dvd drive not reading discs windows 10

  1. Using Windows Search, type in “control” and then pick “Control Panel.”
  2. Select Troubleshooting from the results of a search for Troubleshoot.
  3. To see everything, click the View all option under Actions on the left-hand menu.
  4. You can launch the Hardware and Device Troubleshooter by clicking on it.
  5. Use this troubleshooter if your Windows 10 CD/DVD drive won’t read discs.

4: Disable and then enable the DVD or CD drive

  1. Windows Key + R, devmgmt.msc, and Enter are the steps necessary to open the Dev Management Console.
  2. Right-click the device and select Disable from the context menu that appears.
  3. Enable the CD/DVD drive by right-clicking and selecting Enable device.
  4. Attempt to fix the CD or DVD drive not reading discs in Windows 10 by restarting your computer.

5: Registry Fix – Fix dvd drive not reading discs windows 10

  1. To open the Run dialog box, press the Windows key + R.
  2. Enter regedit in the Run box and press Enter.
  3. Now go to the following registry key:
    • HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
  4. In the right pane, look for UpperFilters and LowerFilters.
  5. You should remove these last two entries. Check to see whether you’ve wiped off the upperFilters. LowerFilters or backFilters. A bak command only deletes the records that are specified.
  6. End your work in Registry Editor and restart your PC.

6: Create a Registry Subkey

  1. Press the Windows key + R to open the Run dialog box.
  2. Enter regedit by pressing the Enter key and then pressing the Enter key again.
    • HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
  3. Create a new key. Atapi key controller0
  4. Create a new DWORD EnumDevice1 value for Controller0.
  5. In this case, you should change the default value from 0 to 1.
  6. Restarting your computer is the only way to make changes take effect.

You’ve made it to the end. However, if you still have questions about this topic, please feel free to ask them in the comments below.

Exit mobile version