Fix ps4 lagging: Sony Interactive Entertainment’s PlayStation 4 (abbreviated PS4) is an eighth-generation home video gaming console. PS4 Pro, the most recent generation, can run 4K games with greater frame rates than the original PS4 model, which was released in 2013. The PS4 is popular and competes with the Xbox One from Microsoft.
PS4 is a capable and clever machine, but it is not immune to glitches, and when these occur in the middle of a game, it can be very frustrating. ps4 lagging and freezing are the most common problems. While playing, the console may freeze and shut off unexpectedly; it may also freeze and shut off when installing the game; the game may run slowly; and so on.
This could be for various reasons, some of which we’ve discussed here.
- The faulty hard-disk drives
- No space on the hard-disk
- A slow internet connection
- Faulty hardware or an outdated firmware
- Firmware bugs and issues
- Poor ventilation
- A crowded or clogged cache
- A cluttered or malfunctioned database
- A software glitch
If your PlayStation 4 freezes or stutters, there is always a solution to the problem. Please continue reading if you are looking for such solutions. With the information in this article, you can easily fix the latency and freezing issues on your PS4.
7 Ways to Fix PS4 lagging and freezing problem
PS4 lagging and freezing problems might result from hardware or software problems. You must reset your PS4 system to a new state before taking further action. Follow these steps to force a restart of your PlayStation 4.
- You should hold the power button on the PS4 controller for a few seconds.
- Select Turn Off PS4 from the menu.
- When the PS4’s power indicator light goes out, unplug the console’s power cable.
- Take a few extra seconds to wait.
- The PS button on the controller and a connected power cable are all you require to turn the PS4 on.
- Try playing games right now. It’s possible that it won’t freeze or lag.
If the preceding approach fails to resolve your problem, go to the methods listed below.
Checking the hard drive
A malfunctioning hard drive may cause PlayStation 4 freezes, slowing, or shutting down. This is because a defective drive can slow down the machine. As a result, checking your hard drive for errors is always a good idea. The hard disk may malfunction if you notice strange noises or actions in or around the drive bay. The PS4 controller may flash white if the hard disk isn’t securely attached to the PS4. If you notice this odd activity, you should replace your hard drive.
Follow these steps to check if the PS4 hard disk is securely mounted or has been physically damaged.
- After pressing and holding the power button for at least seven seconds, two beeps indicate that the PS4 has been completely shut down.
- Disconnect the console’s power supply and any other cords that may be attached.
- Pull the hard disk out of the system to the left to remove it.
- Ensure the hard drive is attached to the motherboard, and the bay cover is correctly placed.
- Removing the board screw and installing a new hard disk are the only options if you notice physical damage to the hard drive.
Disassembly is required to remove or replace the hard disk in the device. Because of this, you must be careful. In addition, You must load the new hard disk with a fresh copy of the operating system and applications.
Once you’ve completed the preceding steps, check whether your PS4 is slow or freezes.
Update the PS4 applications and the PS4 itself – Fix PS4 lagging
If the PS4 is not updated to the most recent version, it may experience freezing and slowness. In this case, updating PS4 software and installing the most recent PS4 version may fix the problem.
Follow these steps to do an application update on your PS4:
- Select the program that requires an update from the PS4 home screen.
- The controller has an Options button.
- From the new menu that appears, choose to Check for Updates.
- The newest updates for this application can be downloaded and installed by following the on-screen instructions.
- Restart your PlayStation 4 when you’ve updated it with any necessary patches.
- Also, make sure all of your PS4 apps are up to date.
Use the following steps to upgrade your PS4 to the latest version:
- You’ll need a USB stick with at least 400MB of free space and 1GB of usable storage capacity. properly
- Make a PS4 folder and an UPDATE subfolder on your USB drive.
- Look at the link for a copy of the most recent PS4 update: https://www.playstation.com.
- Make sure to copy the updates to the newly created UPDATE folder on the USB once downloaded.
- Turn off the computer.
- To use the USB stick, connect it to the PS4’s forward-facing USB port.
- Press and hold the power button for at least seven seconds to activate the safe mode.
- It’ll present you with an eight-option menu in safe mode.
- When prompted, select “Update System Software.”
- You can complete the remaining steps by following the on-screen instructions. Restart the PS4 after the procedure is complete.
Determine if the PS4 is sluggish or freezing after following the preceding steps.
Free up the disk space – Fix PS4 lagging
If your PS4 is freezing and sluggish, it’s probably because your hard drive has run out of space. When there isn’t enough room, the system can’t do its job properly, slows it down. The PS4 will no longer freeze or lag due to unused space on your hard drive being cleaned up.
Follow these steps to free up disk space on your computer:
- Using the PS4’s home screen, you can get to the Settings section of the system.
- System Storage Management is located in the upper right corner under the Settings tab.
- Applications, Capture Gallery, Application Saved Data, and Themes will all be listed, along with the amount of space they take up on your hard drive.
- Select the category you want to get rid of.
- Once you’ve chosen a category, press the controller’s Options button.
- From the resulting menu, choose Delete.
Erasing the Application Saved Data is a good idea because it could include corrupted data.
Hopefully, clearing up some space on your hard drive and restarting your PlayStation 4 should fix the PS4 lagging and freezing issues you’ve been experiencing.
Rebuild the PS4 database
As the PS4 database fills up, it becomes less effective and slower. The database might also become corrupted as data storage grows over time. Rebuilding the PS4 database may be necessary in this case since it will greatly improve performance and eliminate the PS4 lagging and freezing problem.
Depending on the PS4 model and data storage capacity, it may take a long time to rebuild the database.
For PS4 database restoration, perform the following steps:
- Hold the power button for at least seven seconds, or until you hear two beeps, to shut down the PS4.
- To enter safe mode on your PS4, press and hold the power button for about 7 seconds or until you hear the second beep.
- When in safe mode, Bluetooth is disabled, so connect your DualShock 4 controller to the PS4 through USB.
- Push the controller’s PS button.
- A menu with eight options will appear as soon as you enter safe mode.
- Rebuild a database is an option you’ll want to select.
- To rebuild a database, you must scan the hard drive and its contents.
- Hold off on making any decisions until the reconstruction is complete.
Check whether the PS4 lagging and freezing issues have been fixed after it’s been rebuilt.
Check the internet connection
There is an online PS4 game. As a result, a sluggish Internet connection will cause freezing and lagging. A robust internet connection is necessary for the PS4 to function correctly and give the greatest gaming experience. If your PS4 freezes or lags, you can test the internet connection to see if the internet is to blame.
Perform the following steps to make sure you’re connected to the Internet.
- Restart your Wi-Fi router and modem if you’re using it, and then check to see if it’s working again.
- Get a Wi-Fi signal booster and position the PS4 closer to the network to improve Wi-Fi performance.
- For a quicker network connection, use Ethernet instead of Wi-Fi on your PS4. Follow these steps to connect your PS4 to your home network:
- Connect the PS4’s LAN cable to it.
- You can access the Settings from the PS4’s home screen.
- Select “Network” from the menu in the Settings section.
- Under the network tab, click the Set Up Internet Connection link.
- Connecting to the internet is as simple as selecting one of the two options. To use a LAN cable, select the radio button next to it.
- After that, you’ll see a brand new screen. Enter your Internet service provider’s network information in the Custom option and click Next.
- It’s time for the next step.
- Underneath the proxy server, click on the No Use button.
- It may take a while for the changes to take hold.
- As soon as you notice that your internet settings have been updated, it’s time to put your PS4 through its paces.
- Enable port forwarding on your modem router to improve your Internet connection. To set up port forwarding, you must follow these steps:
- Before proceeding, identify your wireless router’s IP address, username, and password.
- In any web browser, type the IP address of the wireless router and hit enter.
- When logged in, enter the username and password.
- You can find the port forwarding options in the forward port area.
- Use port forwarding to forward traffic to your PS4, then go to the following PS4 location to find your IP address:
- Settings -> Network -> View Connection status
- Add ports 80, 443, 1935, 3478, 3479, and 3480 for UDP and TCP forwarding.
- Use NAT Type 2 instead of Type 1
- Observe the changes and implement them.
To see if the PS4 has improved in terms of its performance, you should run it through its paces.
Initialize the PS4
Perform the following steps to begin using the PlayStation 4.
- Using the PS4’s home screen, you can get to the Settings section of the system.
- Under the Settings menu, select the option to start up.
- In the Initialization section, click Initialize PS4.
- In addition to Quick and Full, there are two additional options. The Complete option is best.
- To finish the process, follow the on-screen instructions.
- Following the startup routine, reinstall all backed-up data, games, and applications.
To see if the freezing and lagging issues have been rectified, use the PS4 once again.
Call the customer support of the PS4
If you’ve tried the above alternatives, you may need to replace or repair your PS4’s hardware to fix its freezing and lagging issues. To do so, you’ll need to get in touch with PlayStation 4 customer service. To fix your problem, they will help you replace or repair the malfunctioning PS4.
Make sure your PS4 doesn’t freeze by following these additional instructions.
- Contact the retailer where you purchased the game if the disc is freezing.
- Ventilate the system adequately.
- Rebooting the computer often solves the problem.
You should cure your PS4 lagging and freezing issues using any of the above fixes.